FAIL
SAFE
FUNCTION
E
6
21
Function:
Failsafe aims to prevent control loss during operation due to radio control signal loss between
transmitter and receiver. If the receiver is not able to receive any signal from the transmitter, the
throttle setting on the receiver will default back to its original setting.
Setting:
1. Turn on the transmitter.
2. Connect power on the
r, the LED on the
will turn solid.
receive
receiver
3. Adjust transmitter’s throttle to the stop or break position, then keep still.
4. Press the “Setting” button on the receiver (shown on the picture above), the LED will start
flashing for 3 seconds and then stop, indicating the fail safe setting is completed.
Testing:
a. Turn on the transmitter.
b. Connect power on the receiver.
c. Turn off the transmitter:
d. The throttle servo will turn back to its original setting automatically.
失控保护功能说明
1
.功能说明
失控保护功能是对模型车或船进行失控保护，避免因失控造成损失。主要是对油门通道进行控制，
当接收机收不到控制信号时，接收机的油门通道将会自运行到当初设定的值，以免误动作。
2
.设定方法
1
.将发射机开通电源进入工作状态。
2
.将接收机接通电源进入工作状态，此时信号灯恒亮。
3.
控制发射机的油门通道，使油门控制伺服器或调速器进入刹车或熄火状态，然后保持不动。
4.
此时可看到油门通道的伺服器便会自动进入设定状态的位置。
3
.测试
a.
将发射机打开进入工作状态。
b.
将接受机接通电源进入工作状态.
c.
将发射机关闭电源。
d.
此时可以看到油门通道的伺服器便会自动进入设定状态的位置。
GT3X
DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM
