background image

功能说明:

此功能是对油门输出通道作自动刹车(点刹)设定,适应不同机种赛道以及不同人的操作习惯,以达到最佳刹车效果
及弯道的操控效果,而不至于有甩尾及转弯不足现象出现。

参数说明:

CHANNEL:

通道编号,只有第二通道(油门通道)有此功能;

OFF:

表示

ABS

功能关闭(工厂预设值为

OFF);

ON: 

表示

ABS

功能开启。

操作方法:

在开机菜单下通过"确认"键进入菜单,通过"左右旋转"键进行

ABS

菜单选择,再按确认键进入此菜单的操作(此时三个

字符会闪烁),然后通过“左右旋转”键进行

OFF-ON-OFF

的设定。

编辑完成后按确认键"返回"并进入菜单选择状态.
在任何状态下按"返回"键进入开机画面.

6

17

ALB

Function:
while applying the brakes, locking them up can be easily done. which can cause your vehicle to spin 
out of control, this can be eliminated by pulsing the brakes, so that full control of your vehicle can be 
achieve at all times. The effect as like that of a A.B.S in a real passenger car.

Parameter:

CHANNEL: channel number, it’s only available in channel 2:
OFF: A. B. S. function is OFF:

Operation:

Press the “ENTER” button and turn to the “ALB” menu. Press the “ENTER” button to enter the “ALB” 
menu. The selected function will be blinking. Turn the “ENTER” button to change the setting. 
Press the “ENTER” button to save and return to menu screen. Press the “BACK” button to return to 
the opening screen. 

GT3X

DIGITAL PROPORTIONAL RADIO CONTROL SYSTEM

Summary of Contents for USM-GT3X
























Reviews: