Fluke TS 1200, User Manual

Page: 9 / 44

2-1
Chapter 2
Operation
WX
Warning
When connecting to metallic network wires, handle alligator clips by
insulated boots.
Keys
Table 2-1 describes the TS1200 Test Set keys. Figure 2-1 shows icons associated with some of the
keys.
Table 2-1. TS1200 Keys
Key Description
Power Allows the user to apply power to and remove power from the test set. The Power
key is recessed to avoid accidental power down. To turn the test set off, press and
hold the Power key. The test set automatically powers down after the user-selected
timeout period without activity.
Home The Home key offers the user a quick return to the Home menu. This allows the
user to select POTS or ADSL mode, and to set or check the system’s configuration.
Light Press the Light key to backlight the menu display (LCD) and the keypad for easier
viewing in dark areas. Press the Light key again to turn the backlight off. The
backlight turns off automatically if the keypad isn’t used for the user-selected
period.
POTS/ADSL The POTS/ADSL key allows the user to toggle between POTS and ADSL modes.
SPD Dial The TS1200 allows the storage of 10 speed dialing numbers in ten memory
locations (1 through 9 and zero). Each location will store up to 23 digits. If an
attempt is made to store more than 23 digits, only the first 23 are stored. The
number field is capable of displaying 19 digits. When more than 19 digits are
stored, the digits shift to the next row with each digit entered.
-continued-