2-14
TS1200 Test Set
Users Guide
Tone/Pulse
The Tone/Pulse feature is used to switch between tone and pulse dialing. It is
only active when the test set is off hook. Any time the test set goes off hook,
the TS1200 is automatically set to tone dialing. To change the tone/pulse
selection:
1
Press 4 - Tone/Pulse.
2
Press either 1 -Tone or 2 - Pulse.
3
Press F1 - Accept.
Factory Defaults
The Defaults function allows the user to restore all programmable features to
their original factory settings. Performing this function does not clear stored
telephone numbers.
The defaults are:
•
Pause Duration: 4 seconds
•
Hook Flash Duration: 600 ms
•
Speaker Timeout: 5 minutes
•
Tone/Pulse: Tone
To reset factory default values:
1
Press 5 - Defaults.
2
At the prompt Erase Your Data?, use the number keys to select either
1 - No or 2 - Yes.
3
Press F1 - Accept.
Summary of Contents for TS 1200
