3-5
Replacing the Belt Clip
Replacing the Belt Clip
The TS1200 Test Set belt clip can be replaced by the user if it becomes damaged or worn. To get
a replacement belt clip, contact your local Fluke Networks distributor.
To replace the belt clip:
1
Using a Phillips screwdriver, remove the two screws that secure the belt clip to the test set
housing (see Figure 3-2).
2
Remove the old belt clip and replace with a new one.
3
Secure the belt clip assembly to the test set housing with the original screws. Be careful not
to over tighten the screws.
bdx06.eps
Figure 3-2. Replacing the Belt Clip
Summary of Contents for TS 1200
