2-12
TS1200 Test Set
Users Guide
Speed Dial (continued)
To store a new speed dial number:
1
Select an empty number using Up/Down arrow keys or number keys.
2
Press F2 - Edit.
3
Enter the name in the NAME field and the telephone number in the
NUMBER field.
Note
For alphanumeric entry, use the standard phone keypad.
Q and Z are assigned to the 0 key, and a SPACE key
assigned to the asterisk (
∗
) key. To select between the 3
letters of a key, the user presses the key multiple times
(e.g., to obtain a C, the 2 key is pressed three times).
After the entry is complete, press
F1 - Save
.
Hook/Flash
When the test set is in Talk mode, press F1 - Flash. A timed interruption of the
loop current occurs. Hook flashing is commonly used for call waiting
functions on residential lines. Some PBX setups or telephone office switches
may use this signal to put a call on hold or to activate some special function.
One flash is indicated for each press of F1. The default hook flash duration is
600 ms. Holding F1 does not repeatedly flash the switch hook.
Last Number Redial
Press F3 - LNR (Last Number Redialed), while in Talk mode. The last number
dialed is displayed on the screen as it is dialed. The last number dialed may be
recalled even after powering down the unit. The redial memory has a 23-
digit capacity. LNR is not available once off hook dialing has begun.
Note
Speed Dial numbers DO NOT automatically go into LNR
memory. For example, you call someone who is not in
speed dial, hang up, and call someone using speed dial.
When you hang up again and press LNR you will dial the
first person who was not in speed dial.
Load Coil (Optional)
Allows the user to detect unwanted or misplaced loads. To activate load coil
detection:
1
At the Home screen, press 1 - POTS
.
2
Press F3 - LdCoil. One of the following messages is displayed:
•
Load Coil Not Found
•
Load Coil Found
•
Noise/Data on Line
3
If the Load Coil detecting line cord is not installed, the following
message is displayed: Detector Not Found.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
Summary of Contents for TS 1200
