T+/T+PRO English Instruction Sheet
Page 3
•
When using the probes, keep fingers away from
the ends of the probe tips.
•
Connect the common test lead before
connecting the live test lead. When
disconnecting the test leads, disconnect the live
test lead first.
•
Do not operate the Tester with the battery door
or portions of the cover removed or loosened.
•
When the batteries are depleted, self test will not
function.
•
When the beeper is disabled, it will not sound
until the beeper is reactivated.
•
For voltages above 240 V, you must only connect
to a voltage source for a MAXIMUM of 30s and
then disconnect for a MINIMUM of 300s.
•
Perform a self test before any measurements are
taken for voltage, continuity, resistance, or
rotary field. See “Self Test”.
•
Exercise caution when performing
measurements on PLC (Programmable Logical
Controller) inputs. When measuring relay control
voltages on PLCs, be aware that this may open
or close the relay/switch.
•
All appliances or equipment on the circuit being
tested should be unplugged to help avoid
erroneous readings.
W
Caution
Although the Tester may be used with depleted batteries,
replace depleted batteries immediately to avoid Tester
damage from battery acid leakage.
1.800.868.7495
Fluke-Direct
.ca
