manualshive.com logo in svg

Fluke OPTIVIEW XG, Getting Started Manual

Share
Download
Fluke OPTIVIEW XG Getting Started Manual Download Page 36

32

OptiView XG Network Analysis Tablet

Getting Started Guide

Using the Touchscreen, Stylus, Keyboard, and Mouse

Multi-Touch Screen Use and Care

The Multi-Touch Screen supports Windows 7 multi-touch gestures such as Flicks and right-click.

Clean the touchscreen using a soft cloth that has been moistened with mild detergent. Do not 
spray liquid directly on the touchscreen because the liquid could seep into the OptiView XG 
housing. Do not use harsh cleaners on the touchscreen. 

See also: “Stylus” on page 16.

Multi-Touch Screen Calibration

The OptiView XG uses a standard Windows 7 touchscreen driver. To calibrate the touchscreen:

1. Select the Windows button 

 (in the lower left corner of the display).

2. Select 

Control Panel

.

3. Select 

View by: Small Icons

. This selector is in the upper right area of the screen.

4. Select 

Tablet PC Settings

. 

5. In the 

Tablet PC Settings

 window, select the 

Calibrate

 button.

6. Follow the prompts.

Summary of Contents for OPTIVIEW XG





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands