manualshive.com logo in svg

Fluke OPTIVIEW XG, Getting Started Manual

Share
Download
Fluke OPTIVIEW XG Getting Started Manual Download Page 24

20

OptiView XG Network Analysis Tablet

Getting Started Guide

Establishing a Wireless Connection

OptiView XG Wireless Capabilities 

Wireless capabilities are an option at time of purchase, or may be enabled after purchase in 
certain circumstances. If you purchased wireless capability and you reside in a country for which RF 
certification has been received, the Wi-Fi adapters were enabled at the factory prior to shipment.

The OptiView XG Network Analysis Tablet includes internal wireless adapters and a spectrum 
analyzer. They are available to the OptiView XG application and Fluke Networks AirMagnet 
mobility applications for wireless network access and wireless LAN analysis and troubleshooting.

The OptiView XG application can use the Wi-Fi adapter for network access. Once connected, you 
can analyze and troubleshoot the LAN.

The Fluke Networks AirMagnet mobility product suite uses the Wi-Fi adapters and spectrum 
analyzer for comprehensive 802.11 and RF interference analysis as well as for site survey projects.

The OptiView XG tablet includes two Wi-Fi adapters: Wi-Fi 1 is for general use. Wi-Fi 2 and the 
spectrum analyzer are reserved for use by Fluke Networks AirMagnet applications. 

GLZ22.EPS

Figure 13. Wi-Fi Indicators

Wi-Fi Indicators

Summary of Contents for OPTIVIEW XG





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands