Fluke endurance series, User Manual

Page: 47 / 102

Innovative High Temperature Fiber Optic Infrared Pyrometers
Device Control
35
6.1.1. The Object / Target Temperature Display (green 7-segment LED type)
Figure 23: Upper Object/Target Temperature Display
The Object/Target Temperature Display fulfills two tasks to inform the operator:

In normal operation after warm up phase, it displays the current measured object
temperature, including any signal processing like “Averaging Hold”, “Peak Hold” or
“Valley Hold”. The displayed temperature depends on the preset measurement unit (°C
or °F), done in the “CONFIGURATION MENU” and described hereafter.

In abnormal operation, during warm up phase or in failure case, discovered through the
failsafe-circuit, it displays an error code (e.g. ECHH, ECUU, EUUU,
EAAA…). Please
see section 11.2, Fail-Safe Operation.
6.1.2. The Screen / Menu Display
Figure 24: Lower Screen / Menu Display
The Screen/Menu Display is the central user interface display, which shows all selected menus,
their submenus and parameters. In dependence of the selected main menu item, it displays the
first submenu item as default. The menu, sub-menu and entry selection will be done by specific
buttons, described herein afterwards.
6.1.3. The LASER Sighting Indicator LED (red)
Figure 25: Upper LASER Sighting Activation LED (red)
Indicates the activation (switched-on) of the integrated
green color LASER sighting option.
6.1.4. The Status Indicator LED (green)
Figure 26: Lower Status Indicator LED (green)
Shows a steady green after warm up period to indicate an error free function of the Endurance
®
device.
6.1.5. The 4 Control Panel Pushbuttons
6.1.5.1. The Browser Button
The Browser Button serves as a selector for one of the five submenus. A
specific submenu selection can be done in the following ways:

Pressing the Browser Button several times in series to toggle between the
5 submenus
2-COLOR 41.8 °C
S=1.000 At:93%