Symbol
Description
Fuse
PE Ground
Hot Surface (Burn Hazard)
Read the User’s Manual (Important Information)
Off
On
Canadian Standards Association
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 re-
fers to the level of Impulse Withstand Voltage protection provided. Equipment of
OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from
the fixed installation. Examples include household, office, and laboratory appliances.
C-TIC Australian EMC Mark
The European Waste Electrical and Electronic Equipment (WEEE) Directive
(2002/96/EC) mark.
1.3
Safety Information
Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.
The following definitions apply to the terms “Warning” and “Caution”.
•
“WARNING” identifies conditions and actions that may pose hazards to
the user.
•
“CAUTION” identifies conditions and actions that may damage the in-
strument being used.
1.3.1
WARNINGS
To avoid personal injury, follow these guidelines.
•
DO NOT
operate this unit without a properly grounded, properly polar-
ized power cord.
9116A Furnace
User’s Guide
2
