Fluke 9000A-Z80QT, Instruction Manual

Page: 63 / 108

Z8OQT
Table 5-3. Recreating Sell Test Routines (cont)
9100 -SERIES POD SELF TEST
FAILURE
OPERATOR ACTIONS TO
CODE POD OPERATION
RECREATE TEST
45 Write
data
FF, high
WRITE
DATA FF TO ADDFI FFFF
address
of
I/O space ADDR OPTION: HQ
2001
Pod
UUT
cable
None;
check that pod
is
in
self test and the
connector
in
self internal SELFTEST signal is pulled low at
test socket
the
self
test socket
by UUT
cable
pin
29
(GND).
2002
VCC pin on self test
None;
check VCC line
through the UUT
is high (no power-fail)
cable, and the POWERFAIL signal.
2006
Pod
timeout not None;
troubleshoot as a defective
pod.
expected
2007 BUSRQ
and
WAIT are
Disable enableable
lines. Pod should
disabled not report
timeout.
NOTE: For more
information on
these error codes, see the
text.
MAINFRAME
SELF
TEST SOCKET
WITH MODIFIED
CONNECTOR
*
”a
DEFECTIVE POD
PROBE
Flgure 5-2. Troubleshooting
3
Defectlve Pod
5—11