Fluke 5790A, Operator'S Manual

Page: 142 / 220

5790A
Operators Manual
6-36
RPTSTR
Sets the user report string. The user report string can be read on the Control Display in
local operation, and appears on calibration reports. Do not use control characters (e.g.,
CRLF, ^D, etc.) in the string.
Parameter
String of up to 132 characters
RPTSTR?
Returns the user report string. The user report string can be read on the Control Display
in local operation, and appears on calibration reports.
Parameter
None
Response
(String) Up to 132 characters
SPLSTR
Sets the serial remote mode Serial Poll response string.
Parameters
The string (up to 40 characters) to print on receipt of a ^P character.
SPLSTR?
Returns the string programmed for serial remote mode Serial Poll responses.
Response
(String) The serial remote mode Serial Poll string.
SP_SET
Sets the serial port settings and saves them in nonvolatile memory.
Parameters
One or more of the following, in any order:
1.
Baud rate as 300, 600, 1200, 2400, 4800, 9600, 19200, or 38400
2. TERM or COMP (See note below)
3. XON, RTS, or NOSTALL (Stall method)
4. DBIT7 or DBIT8 (Number of data bits)
5. SBIT1 or SBIT2 (Number of stop bits)
6. PNONE, EVEN, ODD, or IGNORE (Parity)
7. CR, LF, or CRLF (End-Of-Line)