Fluke 5790A, Operator'S Manual

Page: 137 / 220

Remote Commands
Alphabetical List of 5790A Device-Dependent Commands
6
6-31
Example
ISCE0 52
Loads 00000000 00110100 into the register, enabling bits 5 (MCCHG), 4
(MDCHG), and 2 (RNGCHG).
ISCE0?
Reads the contents of the Instrument Status 1 to 0 Change Enable register described
under "Checking 5790A Status."
Parameter
None
Response
(Integer) The contents of the Instrument Status 1 to 0 Change Enable register in decimal.
Example
ISCE0?
Returns 52 if bits bits 5 (MCCHG), 4 (MDCHG), and 2 (RNGCHG) are enabled (set to
1) in the Instrument Status 1 to 0 Change Enable register.
ISCE1
Loads two bytes into the Instrument Status 0 to 1 Change Enable register described under
"Checking 5790A Status."
Parameter
The decimal equivalent of the binary number to load into the register. You can also send
a binary, octal, or hexadecimal number if you precede the number with #b, #o, or #h,
respectively. (A number without a preceding designator is taken as decimal.)
Example
ISCE1 52
Loads 00000000 00110100 into the register, enabling bits 5 (MCCHG), 4 (MDCHG),
and 2 (RNGCHG).
ISCE1?
Reads the contents of the Instrument Status 0 to 1 Change Enable register described
under "Checking 5790A Status."
Parameter
None
Response
(Integer) The contents of the Instrument Status 0 to 1 Change Enable register in decimal.
Example
ISCE1?