4
Quick Start
CAUTION:
READ SECTION 6 ENTITLED BATH USE before placing the
bath in service. Incorrect handling can damage the bath and void the war-
ranty.
This section gives a brief summary of the steps required to set up and operate
the bath. This should be used as a general overview and reference and not as a
substitute for the remainder of the manual. Please read Section 5, Installation,
through Section 8, General Operation, carefully before operating the bath.
4.1
Unpacking
Unpack the bath carefully and inspect it for any damage that may have oc-
curred during shipment. If there is shipping damage, notify the carrier immedi-
ately. Verify that all components are present:
•
6331 Bath
•
Access Hole Cover
•
Fluid Expansion Reservoir with Cover (attached to the back of the bath)
•
User's Guide
•
RS-232 Cable
•
Report of Test
•
Drain Valve (attached to the bath)
•
9930 Interface-it Software and User's Guide
•
Tipping Prevention Bracket (including mounting hardware for wood or
concrete floor)
•
2019-DCB Kit, Liquid-in-Glass (LIG) Adapter and Carousel (Optional)
•
2069 Scope, Liquid-in-Glass (LIG) with mounts (Optional)
If you are missing any item, please call an Authorized Service Center (see Sec-
tion 1.3 on page 5).
11
4 Quick Start
Unpacking
