Fluke Calibration 4322-SYS-NAVAIR, Service Manual

Page: 77 / 186

Controller Maintenance
Controller Part Replacement
4
4-25
6. Install the anti-vibration device.
7. Slide the upper communications box (

) into the top of the control panel (

).
8. Install the two flanges (

) that secure the lower communications box (

) to the
chassis. To do this, install the four screws and washers (

and

) on each flange
(

).
9. Use the instructions in “Chassis and Control Panel” on page 4-9 to install the control
panel and put the chassis back into the case.
1
4
7
5
6
3
2
Anti-Vibration
Device
Ribbon Cable
Control panel shown seperated to help visualize the procedure.
Seperation not required for this procedure.
hbx072.eps
Figure 4-12. Communications Box Replacement