Fluke Calibration 4322-SYS-NAVAIR, Service Manual

Page: 56 / 186

4322
Service Manual
4-4
Maintenance Procedures
This section supplies maintenance information and procedures for the Controller.
The Controller is easy to maintain and troubleshoot. The onboard software monitors the
system status and provides error messages to the user if any of the internal components
fail. Chapter 8 lists the error codes along with a description of the problem and an action
to take to resolve the issue.
The Controller also has additional features to help maintenance personnel perform
maintenance on the Controller. Read the subsequent sections to learn more about the
Event Log, CalCheck, and Self-Calibration.
Event Log
The Event Log is an automated event recorder used by maintenance personnel to see if
the Controller has experienced any failures, overpressures, or exceedences. Each
recorded event has specific information on the event and contains a date and time stamp
to indicate when the event occurred.
hbx086.jpg
View the events in the Event Log as follows:
1.
Select

on the Main menu.
2. Select the
Internal
tab.
3. Select
Event Log
to open the ID menu.
Clear the events in the Event Log as follows:
1.
Select

on the Main menu.
2. Select the
Internal
tab.
3. Select
Event Log
to open the ID menu.
4. Select
Clear Log
.
Front-Panel and Case Cleaning
To clean the Calibrator, wipe it with a cloth that is lightly dampened with water or mild
detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or methanol based
fluids.