25
Remote Control
Mount Installation:
Option 1: Using Adhesive Strip
1.
Wipe wall with rubbing alcohol.
Do not
use water or household cleaners.
2.
Remove the liner from the adhesive
strip on the back of the remote
mount
and
press
firmly
to
the
desired position on the wall.
Option 2: Using Screw
1.
Once desired position is selected, drill two holes into the wall with a 3/16” drill bit.
2.
Insert the pointed tip of the anchor into the wall, using a hammer if necessary, until flush
with the wall.
3.
Attach the remote mount to the wall using the provided ¾” screws and a Phillips head
drill bit.
4.
Install AAA batteries into the remote control and insert into mount.
Cleaning and Maintenance:
• Wipe with a soft cloth and water only to maintain appearance and avoid damaging the
surface of your bidet.
• This product is plastic. Do not wipe it with dry cloth or a toilet paper, as this may cause
damage to the appearance of the unit.
• There are electronic components in the back cover of the product. Please take necessary
precautions to prevent water from seeping into it. Doing so can lead to functional failure of
the product.
• Always make sure to keep the transmitter and receiver of the remote control clean to avoid
connectivity issues.
• See page 22 for nozzle cleaning information.
Do not use on freshly
painted walls. Wait 7 days
before using adhesive.
NOTICE
Summary of Contents for soft spa 9500
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
