27
TROUBLESHOOTING:
Please read the following information carefully and follow the instructions to solve any problems that may
occur. If the product is still not working properly, please contact Fluidmaster Technical Services
(800-631-2011) for further assistance.
WARNING:
In case of water leakage, please close the water-supply shutoff valve immediately and pull out the
power plug to shut off the unit.
Please confirm the following possible reasons for failure of unit to work.
Check the power supply.
1.
Is the power supply working properly?
2
. Is the plug inserted?
3.
Did the electrical protection switch trip?
Check the water supply.
1.
Is the water supply normal?
2.
Is the water supply valve closed?
Read carefully the following information on the seat temperature level indicator
light, water temperature level indicator light and alarm functions.
If any of these issue occur, please immediately cut off the power supply, and contact Fluidmaster
Technical Services (800-631-2011) for further assistance.
1.
The power indicator light on the product flashes.
2.
The leakage protection switch of the power plug frequently trips.
Double Bump Grommets Alternative Method.
Use the optional wingnuts and washers as shown.
1.
While holding the screw in place with a Phillips Head screwdriver, install the washer and
wingnut onto the screw from the underside of the toilet.
2.
While holding the wingnut in one hand, turn the Phillips Head screwdriver to fully tighten
the assembly.
3.
Tighten until the mounting plate is seated firmly to the topside of the toilet.
4.
Tighten the assembly only enough to secure the plate so it will not shift with your hands.
Continue to Step 2A, page 12.
OVERTIGHTENING CAN
CAUSE THE PLATE TO
CRACK OR BREAK.
NOTICE
Sliding Rail
Mounting Screw
Washer
Wingnut
Summary of Contents for soft spa 9500
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
