11
A.
Dunk grommets
(C)
, with screws, in a cup of water before
inserting them for easier installation.
Step 1:
Install Mounting Plate
B.
Insert skinny side of double bump grommets
(C)
with screws
into the seat holes and pull from the bottom while applying
pressure to the top. Once inserted, remove screw and reserve
for Step 2E.
Alternative method:
Go bottoms up! Push the
top of the grommet through the bottom of the
hole on the underside of your toilet. If you are
still having issues, see page 27.
C.
Place mounting plate
(F)
on top of grommets.
D.
Align the center of each sliding
rail
(C)
, flat side down, over the
grommet hole by placing it in the
mounting plate slot.
E.
Secure sliding rails by inserting screws
(C)
through the
grommet hole, and loosely tighten with screwdriver.
Correct!
(C)
(F)
(C)
(C)
Pe
ac
h T
ip!
Top
Bottom
Keeping the screw in
the grommet will
make insertion easier!
Pe
ac
h T
ip!
Mounting plate should be firmly
attached but able to move
slightly with screws in place.
Summary of Contents for soft spa 9500
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
