Reversing Door
Figure 14. Reversing Door
4.
Using a slotted screw driver, remove the 4 screws that mount the door to the
mixer. Save for later use.
5.
Reach behind the door post and remove the 2 magnets by pressing the tabs.
6.
Insert these magnets in the slots on the opposite door post.
7.
Position the door with the stud at the top and mount on the door post using
the screws that were removed earlier.
8.
Close the door.
9.
It may be necessary to adjust the safety switch at the top of the door near
the stud. You should hear a clicking sound as the door is opened and closed.
Side- to-side adjustments are done with a slotted screw driver.
Figure 15. Safety Switch Adjustment
Fluid Management Customer Service 1.800.462.2466
Harbil 5G Mixer | 43
