Flow Fitness Glider DCT250i, Manual

Page: 112 / 116

112
7. Troubleshooting
7. Troubleshooting
Problem
During training the crosstrainer makes beeping or scratching noises.
Solution
Beeping or scratching noise are mostly caused by the plastic cover hitting or scratching the metal frame.
The solution to this problem is to spray this components with WD40. WD40 is available in hardware stores.
Problem
De computer doesn’t or badly reads your heart rate.
Solution
Receipt of the heart rate with use of the handle bar sensors is not consistent. Sweat, movement or even
hand creme can have a negative effect on the connection.We advise you to use a chest belt while training
a heart rate controlled exercise program. The handle bar sensors are primarily used for occasionally
checking the heart rate during a training excises.
When there is no heart rate reception when using a chest belt check the following:
- Is the chest belt coded? Coded chest belts don’t work on our equipment. The chest
belt must be “Polar Compatible” and send a 5Hz signal.
- Have you read the chest belt’s manual? It is important that the sensors are made moist
for a better contact with the skin.
- Is there a full and correctly placed battery?
- Is the chest belt worn tight enough?
Problem
I cant find the iConsole
+
App within the Google Play store or Apple App Store.
Solution
If you can’t the App with the search term “iConsole”, try “i”, “I-console” of “I-” instead.
Problem
iConsole does’t show in the list of bluetooth devices on my smartphone or tablets settings menu.
Solution
The crosstrainer needs to be turned on for transmitting the bluetooth signal. The adapter must be connect-
ed between the wall outlet and the crosstrainer. Then get the crosstrainer into motion for turning on the
display. Now the iConsole will appear in the list of bluetooth devices and a connection can be established.