427-0100-00-12 Version 100
December 2018
4
The information contained herein does not contain technology as defined by EAR,15 CFR772, is publicly available, and therefore not subject to EAR.
Installation
1.2
Installation Overview
The Saros Dome camera can be used for indoor or outdoor security applications.
1.2.1
Camera Connections
The camera can be powered using Power over Ethernet (PoE) or with conventional 24 Vac, 12 Vdc,
or 24 Vdc power supplies. To be powered using PoE, the camera must be connected to either a PoE
switch or a standalone PoE power supply (also called a PoE injector). The maximum Ethernet cable
run is 100 meters, including the PoE power supply. For installations using PoE power and IP video, a
single Ethernet cable is the only required connection. The Saros Dome camera is a Powered Device
compliant with the IEEE 802.3af-2003 standard.
Input/Output
The camera can receive one input signal and can provide one output signal. By default, the signals
are configured for normally open alarm switch circuits. Refer to
.
Input Signal
—When an external alarm device closes a switch to complete the circuit for the
camera, an input signal is generated to cause an action or an alarm when configured on the
.
Output Signal
—When an output alarm is generated, the camera closes its internal switch to
complete the circuit for the receiving device.
1.2.2
Supplied Components
The Saros Dome camera kit includes these standard components:
Items Included in Kit
Back box cover
10-pin connector
Ethernet port
Sunshield
Torx
wrench
Camera ball
Back box
Screwdriver
RJ45 cover
