FLIR Raymarine i70s Installation & Operation Instructions Download Page 91

Page: 91 / 114

15.4 Miscellaneous troubleshooting

Miscellaneous problems and their possible causes and solutions are described here.

Problem

Possible causes

Possible solutions

Check relevant fuses and breakers.

Check that the power supply cable is sound and that all
connections are tight and free from corrosion.

Intermittent problem with power
to the display.

Check that the power source is of the correct voltage and
sufficient current.

Software mismatch on system
(upgrade required).

Go to

www.raymarine.com

and click on support for the

latest software downloads.

Display behaves erratically:

• Frequent unexpected resets.

• System crashes or other

erratic behavior.

Corrupt data / other unknown
issue.

Perform a factory reset.

Important:

This will result in the loss of any settings

and data (such as waypoints) stored on the product.
Save any important data to a memory card before
resetting.

System checks and troubleshooting

Summary of Contents for Raymarine i70s



















































































































Search results

Summary of Contents for Raymarine i70s

Reviews:

Related manuals for Raymarine i70s

Brands by name

Popular brands

FLIR Raymarine i70s, Installation & Operation Instructions

Search results

Summary of Contents for Raymarine i70s

Reviews:

Related manuals for Raymarine i70s

Brands by name

Popular brands