FLIR Raymarine i70s, Installation & Operation Instructions

Page: 30 / 114

5.1 Bezel removal
1 2
3 4
D13426-1
Removing the bezel
Note: Take care when removing the bezel. Do
not use any tools to lever the bezel, doing so may
cause damage.
1. Using your fingers pull the bezel away from the
unit at the top and on one side.
You should hear a click as each side is released.
2. Now pull the bezel away from the unit on the
opposite side.
The bezel can now be pulled away from the unit.
5.2 Removing the keypad
To remove the keypad from the unit follow the steps
below.
• Care Point — Take care not to bend the keypad as
this may prevent the keypad from fitting correctly.
D13430-1
1. Remove the Front bezel.
2. Using your fingers, grip the top edge of the
keypad and pull it down and away from the unit.
30
i70s Installation and operation instructions