FLIR Raymarine i70s, Installation & Operation Instructions

Page: 36 / 114

1. Select the Network Group that you want to assign
the unit to.
A list of network groups will be displayed:
• None (default)
• Helm 1
• Helm 2
• Cockpit
• Flybridge
• Mast
• Group 1 — Group 5
2. Select Brightness/Color Group .
3. Select This Group .
4. Select Sync .
The System will now synchronize all units
assigned to the same group.
5. Select OK .
6. Carry out steps 1 to 5 on all unit’s.
The location of the Shared Brightness menu
on
LightHouse TM MFDs is: ( Homescreen >
Customize > Display Preferences > Shared
Brightness
)
Adjusting the Brightness level will now effect all units
assigned to the same group.
Unsharing a unit
Instrument Displays and Pilot Controllers can be
removed from the Shared Brightness.
D13428-1
1. Press the Power button to display the Shared
Brightness page.
2. Select Unshare .
Selecting Share from the Display Brightness
page will switch back to Shared Brightness.
Changing the color scheme
From the colors menu: ( Menu > Display Settings >
Colors )
1. Select a color scheme from the list
• Day 1
• Day 2
• Inverse
• Red/Black
If the unit is part of a network group, the color
scheme selected will change on all units that support
color schemes and are part of the same group.
Display response
Setting the Display Response
Setting the Display Response to a low value will
dampen data fluctuations to provide a more stable
reading. Setting the Display Response to a high
value will reduce then damping to make readings
more responsive.
From the Display Settings menu: ( Menu > Display
Settings )
1. Select Display Response .
2. Select the data type:
• Speed
• Depth
• Wind speed
• Wind angle
• Heading
3. Adjust the value as required.
4. Select
Save .
36
i70s Installation and operation instructions