FLIR Duo Pro R User Manual Download Page 38

Page: 38 / 50

FLI R

Duo P ro R Us e r Guide

Duo Pro R User Guide, Rev. 1.0

Information on this page is subject to change without notice

File Formats

The Duo Pro R can save image data in a number of file formats, each with unique characteristics.

Table 3 gives a summary of the different file types. Read this section for more detailed explanations

of the available data types for still images and recorded video.

Type

Data Format

Extension

Bit depth

Notes

Still

8-bit JPEG

*_8b.JPG

8-bit

LWIR only, AGC & color palette applied
Visible image is contained in a separate .JPG

Radiometric

JPEG

(recommended)

*_R.JPG

8 & 14-bit

Contains both Thermal & Visible data in a single file:
640 x 512 8-bit thumbnail based on work mode
640 x 512 LWIR 14-bit Flinear data

12MP Visible image

TIFF

*.TIFF

14-bit

Tlinear data, radiometric parameters fixed at time

of capture

Visible image is contained in a separate .JPG

Video

8-bit

*.MOV

8-bit

Thermal only. AGC & color palette applied
Visible video is contained in a separate .MOV

14-bit (RJPEG)

(recommended)

*.SEQ

14-bit

Flinear data, radiometric parameters can be

adjusted in FLIR software

Metadata dynamic per frame
Visible video is contained in a separate .MOV

14-bit (TIFF)

*.TIFF

14-bit

Tlinear data, radiometric parameters fixed at time

of capture

Metadata only for the initial frame
Visible video is contained in a separate .MOV

Table 3. Thermal Image Formats Recorded on microSD Card

6.1

Visible Video Formats

Visible Video can be saved in 1080p or 4K formats. Both will be saved as .MOV files, but note that

4K video is not currently supported by Windows Media Player, so another video player will need to
be used.

Note: Each visible video file will be accompanied by a .SRT file of the same name. This is a subtitle

file that captures metadata (date, time, GPS coordinates, and altitude).

6.2

Infrared: Still File Types

6.2.1

Radiometric JPG

(or “RJP

G”, for short)

The Radiometric JPEG format of the Duo Pro R contains both thermal and visible image data in a

single file format. The file is composed of:

An 8-bit thumbnail image

A 14-bit thermal image

An 8-bit visible JPEG

This is FLIR’s recommended file type, because it captures the 14

-bit raw thermal image in a format

that can be easily post-processed using FLIR Tools and ResearchIR. The major advantage of RJPEG

Summary of Contents for Duo Pro R



















































Search results

Summary of Contents for Duo Pro R

Reviews:

Related manuals for Duo Pro R

Brands by name

Popular brands

FLIR Duo Pro R, User Manual

Search results

Summary of Contents for Duo Pro R

Reviews:

Related manuals for Duo Pro R

Brands by name

Popular brands