FLI R
Duo P ro R Us e r Guide
Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
17
Note: The Bluetooth interface is only intended to be used for ground operations. FLIR
does not recommend flying while Bluetooth is enabled.
•
FLIR Duo Pro R is now ready for use. Press the Record button on the camera or in the App,
to start recording, or use PWM signals setup on the autopilot. The Record LED will
continuously blink red while recording video, or blink red each time a still image is captured.
See Section 0 for instructions on how to adjust camera modes, video/still image formats,
PWM settings, and other configuration options using the FLIR UAS App.
Camera Status and Record LED Description:
Figure 7. LED Description
-
Status LED at power up
–
blinking RED
-
Record LED at power up
–
OFF
-
Status LED at ready
–
solid BLUE, Bluetooth is enabled; solid GREEN, Bluetooth
disabled
-
Record LED at ready
–
solid GREEN
-
Record LED
–
blinking RED during recording; blinking YELLOW if recording alert
(microSD card not present, is full, or is in use by PC)
-
Status LED during firmware update
–
blinking PURPLE
-
Press the Record button to initiate recording. The Record LED will blink red when
recording video or still imagery.
