Basic Setup
5
NOTE
To find the RS232 address and connection information on FLIR DVRs/NVRs, see 5.2.4
Finding RS232 Information on FLIR DVRs or NVRs
, page 16.
To connect to a DVR/NVR using RS232:
1. Connect the RS232 cables from the keyboard to the DVR / NVR.
2. Plug in the keyboard to power it on.
3. Press
ENTER
to open the menu. Select the admin user and enter the
password (default:
000000
) under
PW
. Press
ENTER
to login.
4. Select
Menu Settings
and press
ENTER
.
5. Select
ZONE
and press
ENTER
.
6. Configure the following:
•
ID
: Enter an ID number to save this device under. Each device you con-
nect to must have a unique ID number.
•
Name
: Enter a name for the device of your choice.
Link
: Select
COM232
to select a device over RS232.
•
Type
: Select the type of device you would like to control: DVR or NVR.
•
232Addr
: Enter the RS232 address of the device you are adding.
•
BaudRate
: Select the device baud rate.
•
DataBit
: Select the device data bit setting.
•
Parity
: Select the device parity setting.
•
StopBit
: Select the device stop bit setting.
7. Press
ENTER
to save the device.
8. Press
ESC
to go back one level.
9. Select
Zone Control
and press
ENTER
.
#; r. 1.0/21073/21073; en-US
15
