Basic Setup
5
6. Configure the following:
•
ID
: Enter an ID number to save this device under. Each device you con-
nect to must have a unique ID number.
•
Name
: Enter a name for the device of your choice.
Link
: Select
COM485
to select a device over RS485.
•
Type
: Select
SD
(PTZ camera standalone).
•
485Addr
: Enter the RS485 address of the device you are adding.
•
Rule
: Select the RS485 protocol.
•
BaudRate
: Select the device baud rate.
•
DataBit
: Select the device data bit setting.
•
Parity
: Select the device parity setting.
•
StopBit
: Select the device stop bit setting.
7. Press
ENTER
to save the device.
8. Press
ESC
to go back one level.
9. Select
Zone Control
and press
ENTER
.
10. Enter the ID you set for the device in step 6 and press
ENTER
.
The keyboard will connect to the device. See 6
Controlling Devices Using
the Keyboard
, page 17 for instructions on how to control your device.
5.2.3
Adding a DVR or NVR Using RS232
You can control a DVR or NVR using an RS232 serial connection.
#; r. 1.0/21073/21073; en-US
14
