Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 3-8
AF 04800001
Revision No. 3
Date: 14 Sep 2008
CT Inspection and/or Required Maintenance Checklist
100h
our
Annual
Minimum Level
of Certification
Pitot port.
Inspect for obstruction of Pitot, signs of damage, which
may affect proper airflow. Remove the Pitot port before attempting to
clear any obstructions, making sure the port is not damaged in any
way. Test for proper operation after reinstallation.
RLSA-M
3.7 Empennage
CT Inspection and/or Required Maintenance Checklist
100h
our
Annual
Minimum Level
of Certification
Rudder.
Inspect for signs of damage, looseness, or play in bearings,
and condition of hinge attachments and rudder cable attachments.
Check security of static balance weight. Check for obstruction of drain
holes. Lubricate hinges and cable-attach points. Ensure rudder stops
on the nose gear steering rods make full contact with left and right
rudder stops on the engine mount. Verify rudder angles of deflection as
required in Chapter 4.3.3.6, Rudder Deflection Adjustment.
RLSA-M
Stabilator with trim tab.
Inspect for visible damage and evidence of
latent damage. Inspect looseness or play in bearings. Check security of
static balance weights. Check for obstruction of drain holes. Lubricate
hinges. Ensure stabilator forward and aft stops make full contact with
stop plate. Verify stabilator angles of deflection as required in Chapter
4.3.4.7, Stabilator Rigging.
RLSA-M
Flight controls.
Inspect all push-pull rods, push-pull cable, rudder and
trim-tab control cables, rod end bearings and bellcranks for condition,
play, security of attachment and lubricate. Ensure locking is proper
where applicable.
RLSA-M