Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 8-1
AF 04800001
Revision No. 3
Date: 14 Sep 2008
8 Utility
Systems
8.1 Tools Required
Wrench
8
1
pcs
Hex-nut wrench 3 (or screwdriver)
1 pcs
Hex-nut wrench 4 (or screwdriver)
1 pcs
Hex-nut wrench 5
1 pcs
Screwdriver
5
mm
1
pcs
Hand pressing tool for rope 0.45 - 2.00 mm
1 pcs
Cross-screwdriver (or wrench with header 7)
1 pcs
Screwdriver
with
header
12
1
pcs
Wheel chock
2 pcs
8.2 Materials Required
С
9997065
В
Steel rope 7x7 1 mm
59 in. / 1.5 m
С
9997056
Е
Nicopress stop sleeve 1.5-1.7 mm for 1.6 mm cable
1 pcs
С
9997703
В
Spring
0,5x5,0x25,0 1
pcs
С
9993188 AERODUCT tube CEET-7 1-3/4 ID
59 in. / 1.5 m
C9997727F TY-wraps CV-200 white
2 pcs
8.3 Cabin Heat System
For inspection and maintenance of the heating system one person is required.
8.3.1.1 Type of Maintenance
Line
8.3.1.2 Minimum
Level
of Certification
Owner/Pilot
8.3.1.3 Procedure
Set the plane’s parking brake and additionally put wheel chocks under the main wheels to prevent rolling.
1. Remove the cowlings to get access to the lower part of the firewall forward. Fig. 1.
Fig. 1
2. Check the cabin heater choke for operation:
•
When the handle is pushed (Fig. 2,
а
), the Cabin heater choke
КА
7040200 (Fig. 2, b) is OFF.
