Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 5-3
AF 04800001
Revision No. 3
Date: 14 Sep 2008
1. Unscrew 6 bolts and remove the cover of the air filter box (pos. 3, Fig. 1).
2. Release the clamp by screwdriver and disconnect the filter (inside the box).
3. Replace the filter with a new one as required.
4. Secure the new filter inside air filter box by the clamp.
5. Secure the cover (pos. 3, Fig. 1) by 6 bolts.
6. Release the clamps by a screwdriver and disconnect the hose from the air filter box (pos. 2,
Fig. 1) and the airbox (pos. 1, Fig. 2).
Fig.2
7. Replace the damaged hose to a new one of the same length if required.
8. Connect the hose to the air filter box (pos. 2, Fig. 1) and the airbox (pos. 1, Fig. 2). Tighten the
clamps.
Fig. 3
b. Check carb heat valve operation on airbox.
a. When the handle is pushed (Fig. 4,
а
) the carb heat (Fig. 3) is in OFF position.
b. When the handle is on pulled (Fig. 4, b), the carburetor heater is in ON position.
In all cases the valves in both intake channels must operate simultaneously.
