5
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
WG0510-A02 Ethernet/GPRS interfaces - IP55 enclosure - 24V Rail Din power supply
This manual covers only the WG0510-A01 variant. For all specific details concerning the WG0510-A02
variant, please contact WebdynPulse support.
2.4 Safety advice
It is essential to respect all safety recommendations featured in this guide.
Failure to comply with these recommendations may cause damage to equipment and danger to the
health safety of personnel.
Electrical connections
-
All wiring must be carried out only by a specialized qualified electrician.
-
Prior to installation, all equipment connected to the corresponding
communications bus must be disconnected on both sides (DC and AC).
-
Respect all safety recommendations appearing in meter documentation.
The WebdynPulse unit is liable to damage from electrostatic discharge (ESD)
Avoid all contact with component connectors and terminals
3 Principles of operation
The
WebdynPulse
gateway is the communications hub for your electric meters. It continuously
collects all the data from electric meters. It can also detect the switching of circuit breakers or relays.
