46
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
10.7 Factory reset procedure
A mechanism to reset the gateway to its factory default parameter settings is provided to deal with
problems of access to the WebdynPulse.
To carry out this factory reset, please proceed as shown below:
1)
Turn off the power supply to the unit.
2)
Open the casing of the WebdynPulse to gain access to the configuration DIP switch.
3)
Set DIP switch 2 to ON.
4)
Turn on the power supply to the unit.
5)
Wait for the unit to restart automatically, after all the LEDs flash simultaneously (around 2
minutes).
6)
Reset DIP switch 2 to OFF.
7)
Close the unit.
A factory reset does not delete the collected data.
10.8 Support
If there is a technical problem related to our products, contact Webdyn support:
Webdyn SA
DIP-Switch
1
2
ON
