22
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
It is advisable to force connection to the remote server after restarting the unit. This is
to check that all the new parameters are correct.
To ensure consistency between the server and the unit, it is advisable to delete the
configuration file prefixID_config.ini from the unit before connecting. In this case, the
gateway will generate and upload a new
prefixID
_config.ini file.
6.2.2 Configuration via SMS
It is possible to configure the information required for connection to the remote FTP server via SMS.
To do so, you must first insert an active GPRS SIM card into the WebdynPulse unit and ensure that
you know its telephone number.
SMS to configure the APN:
Send the following SMS to the WebdynPulse:
“
apn=
apn_name
;usr=
user_name
;pwd=
password
;
”
Where:
apn_name:
Name of the APN.
user_name:
User ID for access to the APN.
password
: Password for access to the APN.
SMS to configure the remote FTP server:
Send the following SMS to the WebdynPulse:
“
ftp=
server_name
:
user_name
:
password
:
port
;
”
Where:
server_name
: Symbolic name or IP address of the remote FTP server.
user_name
: User ID for access to the remote FTP server.
password
: Password for access to the remote FTP server.
port
: TCP port number for access to the remote FTP server (default: 21).
It is advisable to force connection to the remote server after restarting the unit. This is
to check that all the new parameters are correct.
SMS to connect to the remote FTP server:
Send the following SMS to the WebdynPulse:
“
Connect
”
To ensure consistency between the server and the unit, it is advisable to delete the
configuration file prefixID_config.ini from the unit before connecting. In this case, the
gateway will generate and upload a new
prefixID
_config.ini file.
