28
GATEWAY SPECIFICATION - WebdynPulse
WebdynPulse – Gateway specification - Version 2.0
If the collection period configured is less than the real data acquisition period, the
data will be timestamped at the acquisition period.
A data acquisition time slot can be defined using the variables listed below, in the file
prefixID
_var.ini.
7 Inputs management
This chapter describes the set of facilities that enables management of the meter inputs features of
the WebdynPulse gateway.
The WebdynPulse has index inputs for pulse counting or relay switching detection.
The gateway manages Class A and B pulse outputs according to IEC 62053-31:1998 standard.
7.1 Wiring
The WebdynPulse has 3 index inputs for pulse counting or relay switching detection.
The gateway manages Class A and B pulse outputs according to IEC 62053-31:1998 standard.
To avoid damage to the gateway, do not inject current or tension on the inputs.
Variable
Definition
Comments
Default
value
DAQ_Period
Collection interval in minutes
common to all data sources
(Inverters, TIC, I/O, Modbus)
Possible value from 0
to 59 minutes
10
DAQ_PeriodSec
Collection interval in seconds
common to all data sources
(Inverters, TIC, I/O, Modbus)
Considered only if DAQ_Period is
equal to 0.
Possible value from 0
to 59 seconds
0
Variable
Definition
Default value
DAQ_TimeZoneStartHour
Acquisition start hour
0
DAQ_TimeZoneStartMinute
Acquisition start minute
0
DAQ_TimeZoneStopHour
Acquisition end hour
0
DAQ_TimeZoneStopMinute
Acquisition end minute
0
