14 Data logger
FLUXUS F502TE
14.1 Activation/Deactivation of the data logger
101
UMFLUXUS_F502TEV1-5EN, 2020-05-29
14
Data logger
The transmitter has a data logger which stores the following data during the measurement:
• date
• time
• measuring point number
• pipe parameters
• fluid parameters
• transducer data
• sound path (reflection or diagonal arrangement)
• transducer distance
• damping factor
• storage rate
• physical quantity
• unit of measurement
• values of the totalizers
• diagnostic values
In order to store the data, the data logger has to be activated.
The available data logger can be displayed.
14.1
Activation/Deactivation of the data logger
• Select the program branch
Output Options
.
• Press ENTER until
Store Meas.Data
is displayed.
• Select
yes
to activate the data logger or
no
to deactivate it.
• Press ENTER.
14.2
Setting of the storage rate
The storage rate is the frequency to transmit or store measured values. If the storage rate is not set, the storage rate
selected previously will be used.
The recommended storage rate is 4 s.
• Select a storage rate or
EXTRA
.
• Press ENTER.
This display will only be indicated if
Store Meas.Data
and/or
Serial Output
are activated.
• Enter the storage rate if
EXTRA
was selected.
• Press ENTER.
14.3
Configuration of the data logger
• Select the menu item
Special Funct.\SYSTEM settings\Storing
.
• Press ENTER.
Output Options\...\Store Meas.Data
Output Options\...\Storage Rate
Output Options\...\Storage Rate\EXTRA
Special Funct.\SYSTEM settings\Storing
Summary of Contents for FLUXUS F502BT
Page 1: ...FLUXUS F502TE UMFLUXUS_F502TEV1 5EN Operating instruction...
Page 6: ...Table of contents FLUXUS F502TE 2020 05 29 UMFLUXUSF502TEV1 5EN 6...
Page 161: ......
Page 162: ......
