Flexim FLUXUS F502BT, Operating Instruction

Page: 114 / 162

16 Advanced functions
16.6 Diagnosis with the help of the snap function
FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
114
During the measurement, the designation of the physical quantity is displayed in capital letters to indicate that the value is
uncorrected.
• Press ENTER.
If yes is selected, the uncorrected flow velocity will only be used if the flow velocity is selected as physical quantity in the
program branch
Output Options
.
All other physical quantities (volumetric flow rate, mass flow rate, etc.) will be determined with the corrected flow velocity.
During the measurement, the designation of the physical quantity "flow velocity" is displayed in capital letters to indicate
that the value is uncorrected.
• Press ENTER.
In both cases, the corrected flow velocity can also be displayed.
Press to scroll until the flow velocity is displayed. The uncorrected flow velocity is marked with U .
Uncorrected flow velocities transmitted to a PC are marked with uncorr.
16.6 Diagnosis with the help of the snap function
By means of the snap function it is possible to store measuring parameters which are useful for the evaluation of measuring
results or for diagnostic purposes.
• Select the menu item Special Funct.\SYSTEM settings\Signal snap .
• Press ENTER.
Snap memory settings
• Select
on
to activate the snap function. Select
off
to deactivate the snap function.
• Press ENTER.
• Select Install Snap .
• Press ENTER.
• Enter the number of snap memory storage spaces.
• Press ENTER.
Special Funct.\SYSTEM settings\Signal snap
Special Funct.\SYSTEM settings\Signal snap\DSP-SignalSnap
Special Funct.\...\DSP-SignalSnap\Install Snap
Special Funct.\...\DSP-SignalSnap\Install Snap\Snap-Memory
FLOW VELOCITY
2.60 m/s
PROFILE CORR.
>no< YES
Flow Velocity
*U 24 m/s