Flexim FLUXUS F502BT, Operating Instruction

Page: 68 / 162

8 Start-up
8.3 Program branches
FLUXUS F502TE
2020-05-29, UMFLUXUS_F502TEV1-5EN
68
8.3 Program branches
The following schema shows the program branches. For a detailed overview of the menu structure see annex A.
1
SYSTEM settings contains the following menu items:
• dialogs and menus
• inputs
• measurement
• outputs
• storing
• snap
• network
• serial transmission
• miscellaneous
• clock settings
• libraries
8.4 HotCodes
A HotCode is a digit sequence that activates certain functions and settings.
• Select Miscellaneous in the menu item Special Funct.\SYSTEM settings .
• Press ENTER.
• Select yes to enter a HotCode.
• Press ENTER.
• Enter the HotCode.
• Press ENTER.
• The error message
INVALID HOTCODE will be displayed if an invalid HotCode has been entered.
• Press ENTER.
• Select yes to enter the HotCode again or no to return to the menu item Miscellaneous .
• Press ENTER.
Parameter Measuring Options Special Funct.
Pipe parameters Measuring point number Physical quantity System settings
1
Fluid parameter Number of sound paths Unit of measurement Instrument information
Transducer type Transducer positioning Damping Print of measured values
Length of extension cable Measurement Output of measured value Deletion of measured values
Consistency check Program code
Special Funct.\SYSTEM settings\Miscellaneous
Input a HOTCODE
Please input a HOTCODE: 000000
Input a HOTCODE