Angle grinder L 2106VC, L 2108 VC
16
Operating instructions
Danger!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the angle
grinder
1. Unpack the angle grinder and check
that there are no missing or damaged
parts.
2. Attaching the quick-change guard
– With the spindle face up, push the
matching guard with coding onto the
clamping collar until the clamping ring
is situated fully on the bearing cover.
– Rotate the guard into the required
position and secure by throwing the
clamping lever.
Note
If required, before actuating the clamping
lever, tighten the hexagon-head nut until
the lever can still just be actuated manually.
3. Attaching the auxiliary handle.
Switch on and off
Brief operation without engaged switch
rocker:
–
First press the starting lockout.
Then press and hold down the switch.
Release the starting lockout.
–
To switch off, release the switch.
Continuous operation with engaged
switch rocker:
Caution!
Following a power failure, the switched-on
machine will start running again.
–
First press and hold down the starting
lockout and then the switch.
–
To lock into position, hold down the
locking button and release the switch.
Release the starting lockout.
WS_Gr6.book Seite 16 Donnerstag, 19. Mai 2005 2:11 14
Summary of Contents for L2106VC
Page 1: ...L2106VC L2108VC 325 597 05 05 ...
Page 197: ......
