Angle grinder L 2106VC, L 2108 VC
14
For your safety
Danger!
Before using the angle grinder, please read
and follow:
–
these operating instructions,
–
the “General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet-no. 315.915),
–
the currently valid site rules and the
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
–
used as intended,
–
in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 50144:
:
Vibration
Weighted effective value of acceleration
according to EN 50144: 5 m/s²
Intended use
This angle grinder
–
is designed for industrial applications,
–
for dry grinding and cutting metal and
stone with rough wheels and cutting-off
wheels which are permitted to operate
at a circumferential speed of 80 m/s,
–
for surface grinding metal and stone with
tapered cup wheels up to 110 mm in
diameter which are permitted to operate
at a circumferential speed of 50 m/s,
–
for surface grinding with sanding sheets
on a backing pad which has been
designed to operate at the speed of the
machine.
–
for derusting and cleaning with cup
brushes which have been designed to
operate at the speed of the machine.
–
for use with grinding tools and
accessories which are indicated in
these instructions or recommended
by the manufacturer.
If stone is cut with fibre-reinforced cutting-off
wheels, guide supports must be used.
FLEX has suitable cutting guards in its range
of accessories.
Not permitted are e.g. chain cutting wheels,
saw blades.
Safety instructions
Danger!
n
When using the power tool,
wear protective equipment:
Goggles, dust mask, ear protection,
protective gloves, sturdy shoes.
If required, also wear an apron!
n
Always guide the angle grinder with both
hands. The handle (5) must be attached!
n
Do not clamp the angle grinder in a vice.
n
Always lay the power cord (9) to the rear
away from the angle grinder.
Sound pressure
L
PA
Sound power
L
WA
dB(A)
dB(A)
L2106VC
90
103
L2108VC
90
103
WS_Gr6.book Seite 14 Donnerstag, 19. Mai 2005 2:11 14
Summary of Contents for L2106VC
Page 1: ...L2106VC L2108VC 325 597 05 05 ...
Page 197: ......
