Angle grinder L 2106VC, L 2108 VC
17
–
To switch off, briefly press and release
the switch.
Adjusting the quick-release
guard
Danger!
When using the angle grinder for roughing
or cutting, never work without the guard.
1. Pull out the mains plug.
2. Loosen the clamping lever.
3. Adjust the guard (3).
4. Retighten the clamping lever.
Note
If required, before actuating the clamping
lever, tighten the hexagon-head nut until
the lever can still just be actuated manually.
Attaching or changing
the grinding tool
1. Pull out the mains plug.
2. Press and hold down the spindle lock
(1.).
3. Using the stop key, loosen the clamping
nut on the spindle in an anti-clockwise
direction and remove (2.).
4. Insert the grinding wheel in the correct
position.
5. Screw the clamping nut onto the
spindle.
– Grinding wheel
≤
6 mm thick:
Clamping nut collar face up.
– Grinding wheel
>
6 mm thick:
Clamping nut collar face down.
WS_Gr6.book Seite 17 Donnerstag, 19. Mai 2005 2:11 14
Summary of Contents for L2106VC
Page 1: ...L2106VC L2108VC 325 597 05 05 ...
Page 197: ......
