Angle grinder L 2106VC, L 2108 VC
15
n
Clamp the workpiece if it is not securely
positioned by its own weight.
n
Store and handle grinding tools
according to the manufacturer’s
instructions.
n
Before using the machine, check that
the installed tools have been secured
according to the manufacturer’s
instructions.
n
Before using the machine, check that
the grinding tools have been installed
and secured correctly. Switch on the
machine at no load for 30 seconds!
Interrupt the test run immediately if
violent vibrations occur or other damage
is established. Check the machine to
determine the cause.
n
Use only those tools which have
a permitted speed at least as high as
the nominal speed of the angle grinder.
n
Note the dimensions of the grinding tools.
The hole diameter must match the
threaded flange (2). Do not use any
adapters or reducers.
n
Grinding tools must be able to rotate
freely.
n
Keep hands away from rotating grinding
tools.
n
Use grinding tools for the intended
purpose only. Never subject cutting-off
wheels to lateral pressure or use for
rough-grinding.
n
Do not cut workpieces which have
a diameter larger than the maximum
cutting depth of the angle grinder.
n
Switch on the angle grinder before
guiding it towards the workpiece.
n
Do not load the angle grinder to such
an extent that it stops.
n
Before putting the angle grinder down,
switch it off and wait until it stops.
n
Protect persons and flammable objects
from flying sparks. Set the guard (3)
correctly.
n
Do not grind or cut materials which
release hazardous substances
(e.g. asbestos).
n
Never grind or cut light metals which
have a magnesium content greater
than 80 %. Risk of fire!
n
If angle grinders are used outdoors or
are exposed to extreme metal dusts,
connect via a residual-current-operated
circuit-breaker (tripping current
maximum 30 mA).
n
Use only extension cables permitted
for outdoor use.
n
Mark the angle grinder with adhesive
labels only. Do not drill any holes into
the housing.
Damage to property!
n
The mains voltage and the voltage
specifications on the rating plate (11)
must correspond.
n
Do not press the spindle lock (6) until
the grinding tool stops.
WS_Gr6.book Seite 15 Donnerstag, 19. Mai 2005 2:11 14
Summary of Contents for L2106VC
Page 1: ...L2106VC L2108VC 325 597 05 05 ...
Page 197: ......
