The FlexJet TV is designed to be a high-performance, 3D-capable (post-stall manuevering) EDF. It is
capable of aerobatics and 3D manuevers such as hovers, flat-spins, pin-wheels, tumbles, and more!
To achieve this manuevering capability, The FlexJet TV has approximately
90% more power
than the
original FlexJet while remaining
very light.
This excess power is intended for uplines and 3D manuevers
only. Because of this, the pilot is required to limit the speed of the aircraft, and the G-Load on the Aircraft.
- Powered dives are not permitted
- Extended level flight at full throttle is not permitted
- High-Speed, High-G manuevers are not permitted
- Limited to maximum of 20MPH (32km/h) of wind speed or gust
Over-speeding or over-stressing the aircraft can result in structural failure and a crash, which may also
cause personal injury and/or property damage.
1
NOTICE
DAMAGED PRODUCT(S), INJURY AND/OR PROPERTY DAMAGE CAUSED BY FAILURE TO
FOLLOW THE ABOVE GUIDELINES IS NOT COVERED UNDER WARRANTY.
If you as the Purchaser or user are not prepared to accept the liabity associated with the use of the Product, you are
advised to return this product immediately in new and unused condition to the place of purchase. In the event you wish to
return this product, as the Purchaser or user, you are responsible for return shipping.
For more information regarding returns please visit:
https://www.flexinnovations.com/returns.asp
1