10
RECEIVER INSTALLATION/SERVO CONNECTIONS (CONTINUED)
NOTICE
Due to the servo port requirements, PWM is NOT SUPPORTED for the FlexJet TV.
PPM
users should consult the Wiki Page
wiki.flexinnovations.com/FlexJetTV
RETRACTS AND GEAR SEQUENCER OPERATION
The following steps will be required EACH time the aircraft
is powered for flight:
Ensure your radio has Ch5/gear assigned to a 2-position switch.
Hold the FlexJet in a manner that the gear doors and retracts
are unobstructed and free to close and open.
Cycle your transmitters Ch5/Gear switch
from down to up,
then down again waiting about 1 second in each position
.
The gear sequencer is now armed and the gear will deploy or
retract.
Test the retracts. Ensure the gear/doors open and close without
binding or stalling the servos. Adjust ball links as necessary.
When satisfied with the result, power off the aircraft.
Please note, Ch5/Gear can be reversed in the transmitter for
user preference.
1.
2.
3.
4.
NOTICE
Due to the need of 10-servo ports for optimal performance, Spektrum Remote Receivers are NOT
SUPPORTED for the FlexJet TV.
A Receiver with a Modern Digital Connection AND working servo ports is the preferred receiver connection
method for the FlexJet TV.