5
FLEXF3 CONTROL SYSTEM
Works conveniently with all major radio systems
Accepts signals from Spektrum SRXL, Futaba, Hitec or
FrSky S.Bus, Graupner Hott (Sum D of 8), JR XBus (Mode
B), Jeti EX-Bus (standard), or PPM Stream.
Expertly tuned and ready to use
USB port allows, user programming, and firmware updates
(bluetooth module included)
3 Flight Configurations and 2 Control Profiles allow
assistive or aggressive settings to be selected in flight
3-axis and 6-axis gyro utilized in aircraft programming
The FLEXF3 Control System installed in your aircraft is
specifically tuned and configured for the FV-31 Cypher.
Compatible with virtually every serial-based receiver on the
market, the FLEXF3 features special configuration for serial
data connections using Spektrum SRXL, Futaba, Hitec and
FrSky S.Bus, Graupner HOTT (Sum D of 8), JR XBus (Mode B),
and Jeti EX-Bus (standard) systems, as well as PPM
connections.
The FLEXF3 Control System installed in your aircraft has been
pre-tuned for ease of use, eliminating many hours of tedious
setup. For the latest features, programs, transmitter downloads,
and instructions, please visit:
wiki.flexinnovations.com/wiki/Cypher
The FLEXF3 is programmable through any Windows or Mac OS
based PC or tablet utilizing the Betaflight Configurator or
through any Android or iOS device using the SpeedyBee
application. All dual rate, expo, travel and assignable mode
programs are adjusted inside the FLEXF3 System through the
PC or mobile application.
Visit wiki.flexinnovations.com/wiki/Cypher for
the latest product information and tips for your
particular radio brand.
Description of Pre-Configured Control Modes and Flight Configurations
The FV-31 Cypher comes pre-configured with two Control Profiles (Beginner or Advanced) that are controlled by your transmitter's
channel 5 and three Flight Configurations (Hover Configuration, 45° "Magic" Configuration and Conventional Configuration) that are
controlled by transmitter channel 6. The pilot can select between any of these at any time during the flight. Reference the charts below for
further information.
Beginner Profile
Advanced Profile
(6-axis)
(3-axis)
In this profile, the aicraft will return to upright level flight when the transmitter
sticks are returned to neutral. Also, bank and pitch angles are limited to
approximately 68 degrees and the aircraft will not fly inverted.
In this profile, the aicraft has no pitch or bank limits and will not try to return to
level flight when the transmitter sticks are centered. The aircraft is fully
aerobatic in this profile, including loops, rolls, flips and more.
In this configuration, the rear fans are tilted near parallel to the wings. The
aircraft will hover and flies primarily like a helicopter or multirotor in this
configuration. Takeoffs and landings can be done in this flight configuration.
In this configuration, the rear fans are tilted to a 45 degree angle. The aircraft
will fly forward at approximately 12 mph (19kph) and flies like a hybrid between
a helicopter (or multirotor) and an airplane. Short takeoffs and landings can be
done in this flight configuration.
In this configuration, the rear fans are tilted perpendicular to the wings. The
aircraft will fly like a traditional airplane in this configuration, using differential
thrust from the rear fans for yaw control. Traditional airplane takeoffs and
landings can be done in this flight configuration.
Hover Configuration
45° "Magic" Configuration
Conventional Configuration
Conventional Configuration
45° "Magic" Configuration
Hover Configuration
Channel 5
Channel 6