FUTABA TRANSMITTER AND RECEIVER SETUP (CONTINUED)
Receiver Selection
For Futaba users, you must use an S.Bus capable receiver. We've listed a few options below for FLEXF3 compatible
receivers:
Futaba R2001SB S.Bus S-FHSS Receiver (FUTR2001SB) -
Highest Recommended
Futaba R6303SB S.Bus FASST Receiver (FUTR6303SB)
Futaba R7003SB S.Bus FASSTest Receiver (FUTR7003SB)
Receiver Installation
Install your Futaba receiver and antennas according to your receiver's instruction manual.
Follow the diagram below for connection to the FLEXF3 from your Futaba S.Bus receiver.
15
Futaba S.BUS Connection
3 to 4 Pin
Male to Male
(Provided)
Note: Futaba does not interface with Betaflight telemetry, however, some T-FHSS and FASSTest receivers are capable
of sending flight pack voltage back to the transmitter. Reference the Cypher Wiki page for more information:
wiki.flexinnovations.com/wiki/Cypher
