COMMISSIONING
DYNAVERT L
4Bs0503en/002
Version: 11.10.02
8
1.2
Operation and commissioning menu
In general:
Parameter menue
Status menue (Display))
Information menue
•
Select menu by pressing or .
•
Select sub-menu or parameter by pressing or .
•
Accept sub-menu or parameter for data entry by pressing .
•
Enable parameter for changes by pressing ,
−
a black bar appears in the display.
•
Change the parameter by pressing or .
•
Accept new parameter value by pressing .
Example:
Series of keystrokes for changing the rated speed
v 3
−
Press button
−
Press button to enter the menu
P-TRAVEL CURVE DATA
−
Press button
−
Press button down to
v
3
−
Press button
−
Press button or until the specified value appears in the display
−
Press button to take over the value
After parameters have been changed:
−
Press to return to the main menu
−
Press to exit the parameterization level
COMMENT - fault reset:
•
Reset fault message memory by pressing and simultaneously.
Commissioning menu:
Following figures show the required menu items for the travel curves positioning
with/without actual value feedback
and
direct travel:
