13 |
P a g e
SIDE GLASS TRIM REMOVAL / INSTALLATION
–
FLARE H 24”
The additional side trim piece for the H & EH models is installed differently than the standard height unit’s side trim piece
s & has
additional steps required to remove & apply it successfully.
All work should be done with a
cold fireplace
, fireplace appliance turned off and manual gas valve shutoff. Unplug the fireplace
from any electric power (Double Glass Units)
The below picture shows the right-side glass trim
Step 1: Using a drill, untighten the screw that is located at the right
top of the trim side as shown in picture below
Step 2: Move the right trim glass to the left as shown
in picture below
Step 3: Remove the lower side of the trim slowly as
shown in picture below
Summary of Contents for Corner Right & Left 120
